Firmware Burning for USB UVC Camera¶
Download Burning Tool¶
Please click the link and download the folder firstly:
Firmware Burning¶
Detect the Camera Module¶
Tip
Insert the camera into the USB port and click the burn tool in the file folder:
Browse the Firmware File¶
Tip
Click the Browse(浏览) button in the left red circle to browse the firmware file
The firmware file will be provided privately with you by our staff members.
Select and load the File¶
Please browse and select the firmware file our staff send you.
Burn the Firmware¶
Tip
Click the Browse button in the right red circle to Start burn(烧录) the firmware
After burning the firmware successfully, please check the image.
Application Note
-
Please close the software that occupies the UVC interface such as AMCap before programming.
-
Please unplug and reconnect the USB port after programming is complete.
-
If you encounter a programming failure, please unplug the USB port and then program again.